Cart 0

WARN 2" Multi-Mount Winch Carrier w/ Hitch Pin For 4,000 lb. - 4,500 lb .Winches

$ 115.92



WARN 2" Multi-Mount Winch Carrier w/ Hitch Pin For 4,000 lb. - 4,500 lb .Winches

This is Warn's “Multi-Mount Winch Mount for the Warn 4.0ci, RT/XT 40, Vantage 4000 & ProVantage 4500 Winches (4,000 - 4,500 LB. Cap). It has been designed especially for Recreational Utility Vehicles or Utility Vehicles that already have a 2” Class II receiver port in the rear, front or both ends. It's also great for SUVs and small pick-up trucks equipped with Class II receivers. Includes winch carrier. All smaller winches will require re-drilling bolt pattern or purchase multi-mount P/N 70925 for smaller winches) and 5/8 inch hitch pin.

The stinger for this winch mount is 2 inches square by 4 inches long and has been drilled for a 5/8 keeper pin one inch on center from the starting end.

RT40 WINCH MOUNTED TO A 2" RECEIVER
How To Order:  You'll need the following four items:

RT40 Winch
1.

Choose a winch 
Winch Carrier
2.

Winch carrier designed to fit 2" receiver.
PN 70919
Quick Connect Wiring
3.

175 amp Quick-Connect wiring kit for both front and back of vehicle. Includes 20" winch lead, 48" front battery lead and 120" rear battery lead. PN 70920



IMPORTANT
: It is your responsibility to make sure that the receiver ports on your vehicle or vehicles are strong enough to support this product. They should have at least a class II rating. You can use smaller winches, but DO NOT use larger capacity winches on this mount.


Share this Product