Cart 0

WARN 96820 VR12 GEN II 12,000 lb. Truck Winch, Lifetime Warranty!

$ 699.99

WARN VR12  - 12,000 lb. Winch

Big Pulling Power for Heavier Rigs w/Steel Rope

The new WARN VR12 offer enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack looks great and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. And with a 12,000 lb. capacity, the VR12 is great for three-quarter ton and one-ton pickups and bigger, heavier rigs.

  • 12,000 lb. capacity
  • Black tactical look puts you at the head of the off-road pack
  • Waterproof Albright® contactor control for the ultimate in reliability
  • One-piece tie plate replaces tie rods for added strength and rigidity
  • Convertible control pack allows upright or low-profile winch mounting
  • Durable steel rope
  • Powerful, efficient series-wound motor
  • Best-in-class load-holding cone brake for superior control
  • Designed, engineered, and field tested by Warn engineers in Clackamas, OR
  • Backed by a Limited Lifetime Warranty
VR12 SPECS/PART NUMBERS
Part numbers: 96820
Rated line pull: 12000 lbs. (5443 kgs)
Motor: 12V DC, Series Wound
Electrical controls: Contactor
Remote Control: Remote switch, 12 ft. (3.7m) Lead
Geartrain: 3-Stage Planetary
Gear ratio: 216:1
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/Length: 2.5 in./9.0 in. (6.73cm/23cm)
Weight: Shipping: 82.23 lbs. (37.3 kgs); Net product: 76.14 (34.5 kgs)
Wire rope: 80' x 3/8" (9.5mm x 24.3m)
Fairlead: Cast Iron Hawse
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72 in. (1.83m)
Finish: Powder coat over primer undercoating
Warranty: Limited Lifetime

 

12V DC performance specs
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 28.4 (8.6) 65 amps 1/12000 (5443)
2000 (910) 12.6 (3.8) 144 amps 2/11120 (5044)
4000 (1810) 9.5 (2.8) 215 amps 3/10340 (4690)
6000 (2720) 7.5 (2.2) 281 amps 4/9770 (4432)
8000 (3630) 5.8 (1.7) 349 amps 5/9250 (4196)
10000 (4540) 4.4 (1.3) 415 amps
12000 (5440) 3.6 (1.0) 457 amps

Above performance specs are based on first layer of drum

VR12 Dimensions

Winch Dimensions: 21.89 in. L x 6.3 in. D x 9.8 in. H (554mm L x 160mm D x 249.1mm H)
Mounting Bolt Pattern: 10.0 in. x 4.5 in. (254mm x 114.3mm)

 

Buy with confidence from Montana Jack's, we are your WARN Authorized Warranty and Service Center.
We are a Factory Direct WARN Distributor and we stand behind our WARN products for the full manufacturer's warranty period.

WRN-96820


Share this Product