Cart 0

WARN 96815 VR10-S GEN II 10,000 lb. Truck/SUV Winch, Lifetime Warranty!

$ 793.99

WARN VR10-S  - 10,000 lb. Winch, Synthetic

A Perfect Combination of Speed and Muscle

The new WARN VR10-S offers enhanced styling, upgraded performance, and legendary WARN reliability that you can trust. The new convertible control pack looks great and allows upright or low-profile mounting configurations. A waterproof Albright® contactor provides the most reliable winch control available. The one-piece tie plate replaces multiple tie bars for increased strength, and a best-in-class cone brake holds the full-rated load. The 10,000 lb. capacity makes it perfect for Jeep JK, half-ton pickups, and a many SUV applications.

  • 10,000 lb. capacity
  • Black tactical look puts you at the head of the off-road pack
  • Waterproof Albright® contactor control for the ultimate in reliability
  • One-piece tie plate replaces tie rods for added strength and rigidity
  • Convertible control pack allows upright or low-profile winch mounting
  • Standard Duty 3/8" X 90' synthetic rope with cast iron hawse fairlead
  • Powerful, efficient series-wound motor
  • Best-in-class load-holding cone brake for superior control
  • Designed, engineered, and field tested by Warn engineers in Clackamas, OR
  • Backed by a Limited Lifetime Warranty
VR10-S SPECS/PART NUMBERS
Winch model: VR10-S
Part numbers: PN 96815
Rated line pull: 10,000 lbs., (4536 kgs.) single-line
Motor: 12V DC, Series Wound
Electrical controls: Contactor
Remote Control: Remote switch, 12' (3.7m) Lead
Geartrain: 3-Stage Planetary
Gear ratio: 261:1
Clutch (freespooling): Sliding Ring Gear
Brake: Automatic Direct Drive Cone
Drum diameter/Length: 2.625" / 9.0" (6.73cm/23cm)
Weight: Shippin: 64.81 lbs. (29.4 kgs); Net product: 58.73 lbs. (26.6 kgs)
Rope: Synthetic: 90' x 3/8" (9.5mm x 27.4m)
Fairlead: Cast Iron Hawse
Recommended Battery: 650 CCA minimum for winching
Battery leads: 2 gauge, 72" (1.83m)
Finish: Powder coat over primer undercoating
Warranty: Limited Lifetime

 

12V DC PERFORMANCE SPECS
Line Pull
Lbs.(Kgs.)
Line Speed
FT./min(M/min.)
Motor
Current
Pull by layer
layer/Lbs(Kgs.)
0 26 (7.6) 66 amps 1/10000 (4536)
2000 (910) 13.0 (3.9) 160 amps 2/8000 (3629)
4000 (1810) 9.6 (2.9) 247 amps 3/7280 (3302)
6000 (2720) 7.1 (2.1) 332 amps 4/6670 (3026)
8000 (3630) 5.0 (1.5) 417 amps 5/6230 (2826)
10000(4536) 2.3 (0.7) 502 amps

Above performance specs are based on first layer of drum

VR10 Dimensions

 

Winch Dimensions: 20.80 in. L x 6.3 in. D x 9.8" in H (528.2mm L x 160mm D x 249.1mm H)
Mounting Bolt Pattern: 10.0 in. x 4.5 in. (254mm x 114.3mm)

 

Buy with confidence from Montana Jack's, we are your WARN Authorized Warranty and Service Center.
We are a Factory Direct WARN Distributor and we stand behind our WARN products for the full manufacturer's warranty period.

WRN-96815


Share this Product