Please be aware that there are two styles of Plow Side Walls. One style is for the previous style blade and the other is for the new style standard blade which also fits the cyclone style blades. We have included a chart with an image for you to compare to your blade to ensure you choose the correct sidewall for your application. Please choose your part number from the drop down box above. As always, if you have any questions, please do not hesitate to call or email us.
Controls run off, and gives you scoop-like control of snow and other materials. Allows you to gather material before depositing to the side. Heavy duty steel construction. Reversible, can be mounted on either side of a standard blade. Good for snow or ag applications.
For standard style plow blades, you can install two sidewalls (one on each end of the plow) to create a scoop. Easily mounts to our WARN 48", 54" and 60" standard plow blades.
For WARN cyclone plows, use one WRN-70880 at the small end of the blade.
|
WRN-67957
This side wall is for the previous style blades. You will be able to identify the blade by the flat upper edge and the angled rib at the back. Also note the threaded skid feet that came standard with this blade. This sidewall fits WARN standard plow blade part numbers: 37574, 38782 and 38121.
|
| |
WRN-70880
This side wall is for the newer style and cyclone plow blades. Please note the rib with bolt holes at the end of the blade as well as the pin style skid feet that came standard with these blades. This sidewall fits WARN standard and cyclone part numbers: 70948, 70954 and 70960.
 |
