| H |
Not compatible with WARN bumper |
| K |
Not compatible with 3.0 series or 25 & 30 RT/XT series winches |
| L |
This kit requires using a WARN Plow Actuator to life plow |
| M |
May not fit 3.0 series or 25 & 30 RT/XT series winches. Mount modification may be required. |
| N |
Fits 3.0 series or 25 & 30 RT/XT series winches only |
| P |
Does not fit late model '02 ATV. Use '03 PN. |
| S |
Combination Winch Mount and Bumper |
| T |
Factory mount fits 2.5 & 25 series winches only |
| U |
Fits 1.5 & 15 series winches only |
| V |
Incl. Front Class II Receiver, Maximum 4000lb Winch Capacity |
| X |
Incl. Front Class I Receiver, Maximum 3000lb Winch Capacity |
| Y |
Not compatible with manual plow lift |
| Z |
2500lb capacity mount |
| AA |
Factory installed winch |
| AB |
Rear mount |
| AC |
Factory installed mount |
| AD |
Includes rear 2" receiver only, maximum 4000lbs winch capacity |
| AE |
Not recommended for lifting plow blades |
| AG |
Requires use of 2.5 & 25 series or 3.0 & 30 series winches to raise and lower plow blade |
| AI |
Must be revision A2 for "I" series model |
| AJ |
Fits 4.0ci and 40 series winches only |
| AK |
Does not fit trans 4x4 diesel |
| AL |
Kit must be revision B2 for Mid-05 and later |
| AN |
Fits 25 & 30 RT/XT series winch only |
The Warn Plow Mounting Kit remains attached to the ATV and becomes a structural component adding rigidity to the ATV during plowing operations. Placement is forward of the foot pegs to avoid any reduction of ground clearance or operating interference. Quick release pins attach or detach the Warn Plow Blade and base assembly in a matter of moments.
