USED ONLY WHEN LIFTING A PLOW
When not lifting a plow, the winch mounts into either receiver port in a horizontal position for self recovery, as seen below.
The Winch Rotator will only work if you have a Montana Jack's Accessory Receiver System on your machine
The Montana Jack's Winch Rotator virtually eliminates all of the problems associated with using a winch to lift an ATV Plow!
If you are using a winch to lift your ATV plow, this is a Must Have accessory and is another great benefit of having our Accessory Receiver System on your ATV.
Montana Jacks has engineered the Winch Rotator for our Accessory Receiver System that places the winch in the very best position for lifting an ATV plow. It has many benefits, and will substantially reduce the wear and tear on your winch, winch cable and fair lead. The Winch Rotator elevates and turns the winch 90 degrees from its normal horizontal mounting so that the fair lead and cable hook are pointing down to the plow blade instead of straight out. By doing this, we have achieved maximum lift height and eliminated the primary causes of early cable and fair lead failures, friction and bending. It comes with a chain and quick link that will allow you to adjust it for maximum lift height without over lifting your plow. This will eliminate push tube and/or chassis damage. Also, the chain has been designed to be heavy enough to keep the cable tight to the cable drum while plowing in the free float position. This will keep the cable from getting birds nested or crossed up. Also included is a 5/16 shackle to attach the chain to the plow push tube.
This accessory will pay for itself in a short time by extending the life of your winch, winch cable and fair lead.
It easily installs or removes from the front receiver in under a minute.
It comes complete with a retaining pin, tension bolt, 17 inches of 5/16 zinc plated proof coil chain, a 5/16 shackle, and a 5/16 Quick Link.
Quality Features of the Montana Jacks Winch Rotator:
- Made of heavy gauge quality materials to last a lifetime.
- Its quick and easy to use.
As with all of Montana Jacks Utility ATV Accessories, the Winch Rotator is sand blasted and then powder coated to provide a handsome, long lasting, durable finish. (Sand blasting is the very best metal preparation prior to powder coating. It may cost more, but is well worth it.)
Total weight: Rotator and hardware 7 Lbs.
Made with Pride in the U.S.A. (Patent No. 6,634,588)
This product comes with a life-time structural warranty.
* Some ATV's may require the Montana Jack's Power Cable Extension. (see below)
When using your ATV plow at night, click here for optional night vision advantages.
ATTN: Polaris & Yamaha Grizzly Owners - You will also require the Winch Power Cable Extension (see related products below)
Never Use The Winch Rotator Other Than To Lift An ATV Plow.
Doing so may cause damage to the ATV or the "Accessory Receiver System".
IT IS SIMPLE TO INSTALL THE WINCH ROTATOR FOR SNOW PLOWING
Click on image to enlarge |
|
|
|
|
|
STEP
ONE
Unplug your winch from the receiver port and plug in the Winch Rotator. |
STEP
TWO
Insert Winch into the receiver port on the Winch Rotator. (fairlead will be pointing straight down) |
STEP
THREE
Insert the retaining pin to hold the winch in place, then gently tighten the tension bolt to eliminate any movement or rattles. |
STEP
FOUR
Reconnect the Winch Power Cable and connect the chain to your plow. |
| * Adding and Removing the
Rotator takes less than a minute. * |
Also See:
Plow Accessories
Plow Parts
MTJ Winch Rotator Clip - 0:39 seconds
download 5.2mb stream 141kbps
