USED ONLY WHEN LIFTING A PLOW
When not lifting a plow, the winch mounts into either receiver port in a horizontal position for self recovery, as seen below.
The Winch Rotator will only work if you have a Montana Jack's Accessory Receiver System on your machine
The Montana Jack's Winch Rotator virtually eliminates all of the problems associated with using a winch to lift an UTV Plow!
When you are using a winch to lift your UTV plow, this is a Must Have accessory and is another great benefit of having our Accessory Receiver System on your UTV.
Montana Jacks has engineered the Winch Rotator for our Accessory Receiver System that places the winch in the very best position for lifting an UTV plow. It has many benefits, and will substantially reduce the wear and tear on your winch, winch cable and fair lead. The Winch Rotator elevates and turns the winch 90 degrees from its normal horizontal mounting so that the fair lead and cable hook are pointing down to the plow blade instead of straight out. By doing this, we have achieved maximum lift height and eliminated the primary causes of early cable and fair lead failures, friction and bending. It comes with a chain and quick link that will allow you to adjust it for maximum lift height without over lifting your plow. This will eliminate push tube and/or chassis damage. Also, the chain has been designed to be heavy enough to keep the cable tight to the cable drum while plowing in the free float position. This will keep the cable from getting birds nested or crossed up. Also included is a 5/16 shackle to attach the chain to the plow push tube.
This accessory will pay for itself in a short time by extending the life of your winch, winch cable and fair lead.
It easily installs or removes from the front receiver in under a minute.
It comes complete with a retaining pin, tension bolt, 17 inches of 5/16 zinc plated proof coil chain, a 5/16 shackle, and a 5/16 Quick Link.
Quality Features of the Montana Jacks Winch Rotator:
- Made of heavy gauge quality materials to last a lifetime.
- Its quick and easy to use.
As with all of Montana Jacks Utility UTV Accessories, the Winch Rotator is sand blasted and then powder coated to provide a handsome, long lasting, durable finish. (Sand blasting is the very best metal preparation prior to powder coating. It may cost more, but is well worth it.)
Total weight: Rotator and hardware 14 Lbs.
Made with Pride in the U.S.A. (Patent No. 6,634,588)
This product comes with a life-time structural warranty.
Never Use The Winch Rotator Other Than To Lift An UTV Plow.
Doing so may cause damage to the UTV or the "Accessory Receiver System".
