This is Warn's “Multi-Mount Winch Mount for the Warn 4.0ci and RT40 RUV Winch (4,000 LB. Cap). It has been designed especially for Recreational Utility Vehicles or Utility Vehicles that already have a 2” Class II receiver port in the rear, front or both ends. It's also great for SUVs and small pick-up trucks equipped with Class II receivers. Includes winch carrier (4.0 Warn Winch Only. All smaller winches will require re-drilling) and 5/8 inch hitch pin.

The stinger for this winch mount is 2 inches square by 4 inches long and has been drilled for a 5/8 keeper pin one inch on center from the starting end.

IMPORTANT: It is your responsibility to make sure that the receiver ports on your vehicle or vehicles are strong enough to support this product. They should have at least a class II rating. You can use smaller winches than the 4.0 ci, but DO NOT use larger capacity winches on this mount.