header-search.jpg

Keep in mind, if you cannot see your winch when operating it, you cannot prevent this from happening.


Invest in a Montana Jack's
Premium Winch Mounting System

Our "Accessory Receiver System"
will help stop this from happening
to your UTV winch.


Our “Accessory Receiver System” is the foundation of what your UTV has to offer and is a must have product for any UTV equipped with a winch. It takes a little time to study and understand what this system and its accessories can do for your UTV or RUV, but once you have, you will be impressed and amazed. It will provide you with tremendous convenience and it could save you money in winch repairs as well.
 
First of all, the Montana Jack’s “Accessory Receiver System” was designed to be the strongest and most versatile “Winch Mounting System” on the market. It is tested to 4,000 pounds of pulling force for the Yamaha Rhino. It is designed for full radial torque and allows the option of winch transfer from front to rear. Many times the winch would be best located on the rear of the UTV instead of the front.
 
The two leading causes of winch failure are "Contamination" and/or "Cable Stacking". Placing the winch at a higher location as we do, minimizes "Water and Mud Contamination" and allows the operator to see and work with the winch, helping to prevent "Cable Stacking". Contamination is when mud and water get into the bushings, gears and motor of the winch causing serious damage. Cable stacking is common place and is a much more serious problem than most people realize. When rolling in the cable of the winch, it will normally stack to one side or the other. In this event the cable will out-grow the parameters of the winch and can literally tear it apart. Keep in mind, if you can't see your winch in operation, you cannot prevent this from happening.
 
Think about this. Your winch is not going to "Cable Stack" or "Birds Nest" until you are using it. If you are using it, most likely it's because you are in need of it. If your cable stacks to a point of damaging the cable or winch, you will simply be out of luck right when you need it the most. Don't let this happen to you! Repairs for this kind of damage can cost well over $200.00 each occurrence. If either one of these problems happen to you twice, you could have had a Montana Jack's Accessory Receiver System for FREE and be money ahead. Where will you be financially if this should happen to you three or more times?
 
Many UTV's have their winch mounted low and sub-surface. In this position, you can't clearly see the winch, let alone get to it. How will you get a "Birds Nested Cable" untangled from the winch drums if this is your situation? Especially if your winch is buried in the mud. What will you do when your winch cable won't roll in or out when you are in the middle of a self-recovery operation and really need it to work?
 
A winch is a piece of mechanical equipment and must be protected and cared for. It can be your best friend when the going gets tough. The best thing to do is place your winch on a high winch mount that will keep it in clear view, good working order, and out of harms way.
 
Being the best winch mount available is just the beginning of all the benefits and features that our "Accessory Receiver System" has to offer. Being so strong, and well attached to the chassis of the UTV has allowed us to design and engineer a list of accessories that expand the cargo space and the "Utility Capability" of the UTV. With this system installed, you can outfit your UTV for the task at hand quickly and conveniently. Like a Swiss Army Knife.
 
When this system is combined with our "Winch Rotator" it becomes the very best method of lifting an UTV plow. Virtually every problem of lifting a plow blade is then overcome. Cable failure, fairlead failure, lift height, birds nesting, and lifting speed are all resolved. If you do as much winching and snow plowing as we do, you too will come to understand, there just simply is no substitute for the Montana Jack's products.
 
If it sounds like we are proud of this system, it's because we are, and so are our customers. We stand behind all of our Montana Jack's products with a money back guarantee. In this way, there is no risk on your part. If you don't feel that you have received your full dollar value when you get your order, just let us know and we will cheerfully refund your money.
 

This system, when equipped with the "Winch Rotator" provides the very best way to lift an ATV plow.

You bought the best UTV! Now is the time to choose the best in UTV accessories!

No Rattles, No Movement, Just Solid Improvement. That's Montana Jack's.

Please read what our customers have to say about us

"Put a Montana Jack's Accessory Receiver System and a WARN Winch on your UTV, because the best places lie beyond."



Select an Accessory Receiver System that has been custom built for your UTV and learn more about what this amazing system can do for you.



Accessory Receiver Systems built for 04-07 Yamaha Rhino   Yamaha Rhino 450 & 660 Accessory Receiver System 2004-2007
Accessory Receiver Systems built for 08 Yamaha Rhino 700   Yamaha Rhino 450 & 700 Accessory Receiver System 2008-Present
Accessory Receiver Systems built for Polaris Ranger RZR   Polaris Ranger RZR Accessory Receiver System 2008-Present
Shopping Cart
Your cart is empty.


Shipping calculator only works for U.S. Addresses

For Canadian shipments please proceed to checkout for shipping costs.

NO TAX AT JACK'S