Invest in a Montana Jack's
Premium Winch Mounting System
Our "Accessory Receiver System"
will help stop this from happening
to your ATV/UTV winch.
|
Our “Accessory
Receiver System”
is the foundation
of what your ATV or UTV has to offer and is a must have product for any machine equipped
with a winch. It takes a little time to study and understand what this
system and its accessories can do for your ATV or UTV, but once you have,
you will be impressed and amazed. It will provide you with tremendous convenience
and it could save you money in winch repairs as well.
First of all, the Montana Jack’s “Accessory
Receiver System” was designed to be the strongest and most versatile
“Winch Mounting System” on the market. It is tested to 3,000
pounds of pulling force for ATV's and up to 4,000 pounds of pulling force for some UTV's. It is designed for full radial torque and allows the option of
winch transfer from front to rear. Many times the winch would be best
located on the rear of the machine instead of the front.
The two leading causes of winch failure are
"Contamination" and/or "Cable Stacking". Placing the
winch at a higher location as we do, minimizes
"Water and Mud Contamination"
and allows the operator to see and work with the winch, helping to prevent
"Cable
Stacking". Contamination is when mud and water get into the bushings,
gears and motor of the winch causing serious damage. Cable stacking is
common place and is a much more serious problem than most people realize.
When rolling in the cable of the winch, it will normally stack to one
side or the other. In this event the cable will out-grow the parameters
of the winch and can literally tear it apart. Keep in mind, if you can't
see your winch in operation, you cannot prevent this from happening.
Think about this. Your winch is not going
to "Cable Stack" or "Birds Nest" until you are using
it. If you are using it, most likely it's because you are in need of it.
If your cable stacks to a point of damaging the cable or winch, you will
simply be out of luck right when you need it the most. Don't let this
happen to you! Repairs for this kind of damage can cost well over $200.00
each occurrence. If either one of these problems happen to you twice,
you could have had a Montana Jack's Accessory Receiver System for FREE
and be money ahead. Where will you be financially if this should happen
to you three or more times?
Many ATV's have their winch mounted low and
sub-surface. In this position, you can't clearly see the winch, let alone
get to it. How will you get a "Birds Nested Cable" untangled
from the winch drums if this is your situation? Especially if your winch
is buried in the mud. What will you do when your winch cable won't roll
in or out when you are in the middle of a self-recovery operation and
really need it to work?
A winch is a piece of mechanical equipment
and must be protected and cared for. It can be your best friend when the
going gets tough. The best thing to do is place your winch on a high winch
mount that will keep it in clear view, good working order, and out of
harms way.
Being the best winch mount available is just
the beginning of all the benefits and features that our "Accessory
Receiver System" has to offer. Being so strong, and well attached
to the chassis of the ATV has allowed us to design and engineer a list
of accessories that expand the cargo space and the "Utility Capability"
of the ATV. With this system installed, you can outfit your ATV for the
task at hand quickly and conveniently. Like a Swiss Army Knife.
When this system is combined with our "Winch
Rotator" it becomes the very best method of lifting an ATV plow.
Virtually every problem of lifting a plow blade is then overcome. Cable
failure, fairlead failure, lift height, birds nesting, and lifting speed
are all resolved. If you do as much winching and snow plowing as we do,
you too will come to understand, there just simply is no substitute for
the Montana Jack's products.
If it sounds like we are proud of this
system, it's because we are, and so are our customers. We stand behind
all of our Montana Jack's products with a money back guarantee. In this
way, there is no risk on your part. If you don't feel that you have received
your full dollar value when you get your order, just let us know and we
will cheerfully refund your money.
You bought the best ATV!
Now is the time to choose the best in ATV accessories!
No Rattles, No Movement,
Just Solid Improvement. That's Montana Jack's.
Please read what our customers have to say about us
This system, when equipped with the "Winch Rotator" provides the very best way to lift an
ATV plow.
Important Note:
This system is not compatible with ATV
bumpers.
"Put a Montana Jack's Accessory Receiver System and a WARN Winch on your quad, the best places lie beyond."
|
MONTANA WINCHING - Click Image to Enlarge
|
|
|
|
|
|
Select an Accessory
Receiver System that has been custom built for your quad and learn more
about what this amazing system can do for you.
|